Find a Service Center
- 1.375 in Shaft Diameter
- 2.562 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Overall Width | 0.375 in |
| Lubricant | Oil or Grease |
| Case Design | Metal Case |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Temperature Range [Min] | -65 °F |
| Construction | CRW1 |
| Housing Bore Dia. | 2.562 in |
| Operating Temperature [Min] | -40 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Installation | Housing Press Fit |
| Speed | 0.07 ft/min |
| Surface Speed [Nom] | 1,621 ft/min |
| Operating Temperature [Max] | 210 °F |
| Case Construction | Steel Case w/o Inner Case |
| Shaft Dia. | 1.375 in |
| Temperature Range [Max] | 225 °F |
| Design | CRW1 |
| Lip Style | Internal |
| Lip Type | Single Lip |
| Pressure | 10 psi |
| Inch/Metric | Inch |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel Garter |
| Weight | 0.099 LB |
| EAN or UPC | 85311013093 |
