Find a Service Center
- 1.438 in Shaft Diameter
- 2.062 in Housing Bore
- 0.313 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Speed | 0.07 ft/min |
| Surface Speed [Nom] | 1,695 ft/min |
| Case Design | Metal Case |
| Overall Width | 0.313 in |
| Temperature Range [Max] | 400 °F |
| Lip Style | Internal |
| Temperature Range [Min] | -40 °F |
| Installation | Housing Press Fit |
| Case Construction | Steel Case w/o Inner Case |
| Spring Material | Carbon Steel Garter |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Design | CRW1 |
| Housing Bore Dia. | 2.062 in |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 390 °F |
| Inch/Metric | Inch |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Pressure | 10 psi |
| Solid | Yes |
| Lubricant | Oil or Grease |
| Lip Type | Single Lip |
| Operating Temperature [Min] | -5 °F |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 1.438 in |
| Construction | CRW1 |
| Weight | 0.081 LB |
| EAN or UPC | 85311013994 |
