Find a Service Center
Alternate Products
- 1.438 in Shaft Diameter
- 2.686 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Design | CRW1 |
| Spring Material | Carbon Steel Garter |
| Lubricant | Oil or Grease |
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 210 °F |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -65 °F |
| Temperature Range [Max] | 225 °F |
| Housing Bore Dia. | 2.686 in |
| Solid | Yes |
| Lip Material | Nitrile Rubber (NBR) |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Pressure | 10 psi |
| Seal Type | Oil |
| Construction | CRW1 |
| Overall Width | 0.313 in |
| Lip Type | Single Lip |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Lip Style | Internal |
| Operating Temperature [Min] | -40 °F |
| Seal Application | General Purpose |
| Case Construction | Steel Case w/o Inner Case |
| Shaft Dia. | 1.438 in |
| Seal Design | SKF Wave |
| Case Design | Metal Case |
| Weight | 0.097 LB |
| EAN or UPC | 85311014168 |
