Find a Service Center
- 1.44 in Shaft Diameter
- 1.99 in Housing Bore Diameter
- 0.28 in Overall Width
- Silicone Rubber (MVQ) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Lip Style | Internal |
| Speed | 0.05 ft/min |
| Temp Description | w/CW Helix |
| Lip Material | Silicone Rubber (MVQ) |
| Case Design | Rubber Outside Diameter |
| Lip Type | Dual Lip |
| Temperature Range [Min] | -40 °F |
| Construction | HMSA7 |
| Operating Temperature [Max] | 320 °F |
| Seal Design | Molded Design |
| Shaft Dia. | 1.44 in, 36.5 mm |
| Housing Bore Dia. | 1.99 in, 50.5 mm |
| Installation | Housing Press Fit |
| Design | HMSA7 |
| Spring Material | Carbon Steel Garter |
| Pressure | 7 psi |
| Seal Application | Light Dirt Exclusion |
| Temperature Range [Max] | 300 °F |
| Overall Width | 0.28 in, 7 mm |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Construction | Rubber Covered Steel Case |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Inch/Metric | Metric |
| Operating Temperature [Min] | -90 °F |
| Weight | 0.078 LB |
| EAN or UPC | 85311173315 |
