Find a Service Center
- 1.5 in Shaft Diameter
- 2.441 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Shaft Dia. | 1.5 in |
| Overall Width | 0.313 in |
| Design | CRW1 |
| Surface Speed [Nom] | 1,768 ft/min |
| Lip Type | Single Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Solid | Yes |
| Temperature Range [Max] | 225 °F |
| Temperature Range [Min] | -65 °F |
| Housing Bore Dia. | 2.441 in |
| Case Design | Metal Case |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Seal Type | Oil |
| Lip Style | Internal |
| Seal Design | SKF Wave |
| Operating Temperature [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Spring Material | Carbon Steel Garter |
| Installation | Housing Press Fit |
| Construction | CRW1 |
| Case Construction | Steel Case w/o Inner Case |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Max] | 210 °F |
| Weight | 0.097 LB |
| EAN or UPC | 85311015219 |
