Find a Service Center
- 1.5 in Shaft Diameter
- 2.561 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 210 °F |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Solid | Yes |
| Housing Bore Dia. | 2.561 in |
| Spring Material | Carbon Steel Garter |
| Inch/Metric | Inch |
| Case Construction | Steel Case w/o Inner Case |
| Cover/Compensation Ring/Plate Required | No |
| Construction | CRW1 |
| Seal Type | Oil |
| Overall Width | 0.313 in |
| Case Design | Metal Case |
| Speed | 0.07 ft/min |
| Temperature Range [Min] | -65 °F |
| Operating Temperature [Min] | -40 °F |
| Shaft Dia. | 1.5 in |
| Lip Type | Single Lip |
| Pressure | 10 psi |
| Design | CRW1 |
| Seal Design | SKF Wave |
| Lubricant | Oil or Grease |
| Temperature Range [Max] | 225 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Weight | 0.062 LB |
| EAN or UPC | 85311015318 |
