Find a Service Center
Alternate Products
- 1.5 in Shaft Diameter
- 2.686 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Construction | Steel Case w/o Inner Case |
| Construction | CRW1 |
| Seal Design | SKF Wave |
| Lip Material | Nitrile Rubber (NBR) |
| Shaft Dia. | 1.5 in |
| Installation | Housing Press Fit |
| Seal Application | General Purpose |
| Operating Temperature [Min] | -40 °F |
| Design | CRW1 |
| Housing Bore Dia. | 2.686 in |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel Garter |
| Pressure | 10 psi |
| Speed | 0.07 ft/min |
| Lip Style | Internal |
| Inch/Metric | Inch |
| Solid | Yes |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Design | Metal Case |
| Temperature Range [Min] | -65 °F |
| Lip Type | Single Lip |
| Temperature Range [Max] | 225 °F |
| Overall Width | 0.5 in |
| Lubricant | Oil or Grease |
| Cover/Compensation Ring/Plate Required | No |
| Seal Type | Oil |
| Weight | 0.119 LB |
| EAN or UPC | 85311015363 |
