Find a Service Center
- 1.563 in Shaft Diameter
- 2.374 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Pressure | 10 psi |
| Case Construction | Steel Case w/o Inner Case |
| Shaft Dia. | 1.563 in |
| Speed | 0.07 ft/min |
| Construction | CRW1 |
| Design | CRW1 |
| Lip Material | Nitrile Rubber (NBR) |
| Case Design | Metal Case |
| Temperature Range [Min] | -65 °F |
| Lip Style | Internal |
| Lip Type | Single Lip |
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel Garter |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Max] | 225 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Application | General Purpose |
| Overall Width | 0.313 in |
| Inch/Metric | Inch |
| Surface Speed [Nom] | 1,843 ft/min |
| Operating Temperature [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Seal Type | Oil |
| Housing Bore Dia. | 2.374 in |
| Seal Design | SKF Wave |
| Solid | Yes |
| Weight | 0.059 LB |
| EAN or UPC | 85311015776 |
