Find a Service Center
- 1.57 in Shaft Diameter
- 2.62 in Housing Bore Diameter
- 1 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel Garter |
| Lip Material | Nitrile Rubber (NBR) |
| Surface Speed [Nom] | 3,600 ft/min |
| Lubricant | Oil or Grease |
| Temperature Range [Min] | -40 °F |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Case Construction | Steel Case w/o Inner Case |
| Shaft Dia. | 1.57 in, 39.83 mm |
| Seal Design | Assembled Design |
| Housing Bore Dia. | 2.62 in, 66.55 mm |
| Temperature Range [Max] | 250 °F |
| Operating Temperature [Min] | -40 °F |
| Overall Width | 1 in, 25.4 mm |
| Construction | HMS15 |
| Lip Type | Single Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Design | HMS15 |
| Operating Temperature [Max] | 210 °F |
| Case Design | Metal Case |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 10 psi |
| Inch/Metric | Metric |
| Solid | Yes |
| Weight | 0.271 LB |
| EAN or UPC | 85311015912 |
