Find a Service Center
Alternate Products
- 1.563 in Shaft Diameter
- 2.686 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Application | General Purpose |
| Construction | CRW1 |
| Bore Sealant | Bore Tite |
| Case Material | Steel |
| Inch/Metric | Inch |
| Seal Design | SKF Wave |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel |
| Case Design | Metal Case |
| Temperature Range [Min] | -65 °F |
| Lip Style | Internal |
| Spring Type | Garter |
| Surface Speed [Nom] | 1,843 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Max] | 225 °F |
| Housing Bore Dia. | 2.686 in |
| Seal Type | Oil |
| Lip Type | Single Lip |
| Shaft Dia. | 1.563 in |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Max] | 210 °F |
| Overall Width | 0.313 in |
| Case Construction | Steel Case w/o Inner Case |
| Speed | 0.07 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Lubricant | Oil or Grease |
| Design | CRW1 |
| Weight | 0.095 LB |
| EAN or UPC | 85311015943 |
