Find a Service Center
Alternate Products
- 1.563 in Shaft Diameter
- 2.875 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Design | Metal Case |
| Temperature Range [Max] | 225 °F |
| Case Construction | Steel Case w/o Inner Case |
| Overall Width | 0.313 in |
| Lip Style | Internal |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 10 psi |
| Design | CRW1 |
| Operating Temperature [Min] | -40 °F |
| Solid | Yes |
| Seal Application | General Purpose |
| Speed | 0.07 ft/min |
| Housing Bore Dia. | 2.875 in |
| Surface Speed [Nom] | 1,843 ft/min |
| Shaft Dia. | 1.563 in |
| Lip Type | Single Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Construction | CRW1 |
| Seal Design | SKF Wave |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Min] | -65 °F |
| Weight | 0.104 LB |
| EAN or UPC | 85311016032 |
