Find a Service Center
Alternate Products
- 1.594 in Shaft Diameter
- 2.437 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Case Design | Metal Case |
| Temperature Range [Max] | 225 °F |
| Surface Speed [Nom] | 1,879 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Cover/Compensation Ring/Plate Required | No |
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Min] | -65 °F |
| Spring Material | Carbon Steel |
| Seal Type | Oil |
| Overall Width | 0.313 in |
| Speed | 0.07 ft/min |
| Solid | Yes |
| Lubricant | Oil or Grease |
| Bore Sealant | Bore Tite |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Design | CRW1 |
| Case Material | Steel |
| Housing Bore Dia. | 2.437 in |
| Spring Type | Garter |
| Operating Temperature [Min] | -40 °F |
| Shaft Dia. | 1.594 in |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Lip Style | Internal |
| Construction | CRW1 |
| Inch/Metric | Inch |
| Case Construction | Steel Case w/o Inner Case |
| Weight | 0.086 LB |
| EAN or UPC | 85311016445 |
