Find a Service Center
- 1.625 in Shaft Diameter
- 2.374 in Housing Bore
- 0.313 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Housing Bore Dia. | 2.374 in |
| Case Design | Metal Case |
| Operating Temperature [Min] | -5 °F |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Solid | Yes |
| Lip Style | Internal |
| Construction | CRW1 |
| Shaft Dia. | 1.625 in |
| Lubricant | Oil or Grease |
| Spring Material | Carbon Steel |
| Case Construction | Steel Case w/o Inner Case |
| Temperature Range [Max] | 400 °F |
| Surface Speed [Nom] | 1,916 ft/min |
| Pressure | 10 psi |
| Installation | Housing Press Fit |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Seal Design | SKF Wave |
| Seal Type | Oil |
| Lip Type | Single Lip |
| Spring Type | Garter |
| Operating Temperature [Max] | 390 °F |
| Seal Application | General Purpose |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Design | CRW1 |
| Temperature Range [Min] | -40 °F |
| Case Material | Steel |
| Bore Sealant | Bore Tite |
| Overall Width | 0.313 in |
| Weight | 0.072 LB |
| EAN or UPC | 85311016698 |
