Find a Service Center
- 1.63 in Shaft Diameter
- 2.37 in Housing Bore Diameter
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Housing Bore Dia. | 2.374 in |
| Temperature Range [Max] | 225 °F |
| Seal Design | SKF Wave |
| Inch/Metric | Inch |
| Temperature Range [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Max] | 210 °F |
| Speed | 0.07 ft/min |
| Bore Sealant | Bore Tite |
| Overall Width | 0.5 in |
| Solid | Yes |
| Lip Type | Single Lip |
| Operating Temperature [Min] | -40 °F |
| Spring Material | Carbon Steel |
| Design | CRWH1 |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Installation | Housing Press Fit |
| Spring Type | Garter |
| Surface Speed [Nom] | 3,600 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Shaft Dia. | 1.625 in |
| Case Material | Steel |
| Lubricant | Oil or Grease |
| Case Design | Metal Case, Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Type | Oil |
| Case Construction | Steel Case w/Inner Case |
| Construction | CRWH1 |
| Pressure | 10 psi |
| Weight | 0.097 LB |
| EAN or UPC | 85311016711 |
