Find a Service Center
- Radial Shaft Seal
- 160 mm Shaft Diameter
- 190 mm Housing Bore Diameter
- 15 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Application | General Purpose |
| Shaft Dia. | 160 mm |
| Seal Design | SKF Wave |
| Temperature Range [Max] | 400 °F |
| Seal Type | Oil |
| Lip Type | Single Lip w/Spring |
| Overall Width | 15 mm |
| Case Construction | Steel Case w/o Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Metric |
| Pressure | 10 psi |
| Lip Style | Internal |
| Spring Material | Carbon Steel Garter |
| Housing Bore Dia. | 190 mm |
| Construction | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 0.45 LB |
| EAN or UPC | 85311039109 |
