Find a Service Center
- 1.625 in Shaft Diameter
- 2.437 in Housing Bore
- 0.313 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Type | Oil |
| Case Design | Metal Case |
| Temperature Range [Min] | -40 °F |
| Shaft Dia. | 1.625 in |
| Overall Width | 0.313 in |
| Speed | 0.07 ft/min |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Seal Application | General Purpose |
| Housing Bore Dia. | 2.437 in |
| Temperature Range [Max] | 400 °F |
| Installation | Housing Press Fit |
| Solid | Yes |
| Case Material | Steel |
| Seal Design | SKF Wave |
| Spring Material | Carbon Steel |
| Surface Speed [Nom] | 1,916 ft/min |
| Lip Style | Internal |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Min] | -5 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lubricant | Oil or Grease |
| Bore Sealant | Bore Tite |
| Pressure | 10 psi |
| Spring Type | Garter |
| Construction | CRW1 |
| Lip Type | Single Lip |
| Operating Temperature [Max] | 390 °F |
| Design | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Weight | 0.057 LB |
| EAN or UPC | 85311016797 |
