Find a Service Center
Alternate Products
- 1 in Shaft Diameter
- 2 in Housing Bore Diameter
- 7 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Shaft Dia. | 1.625 in |
| Housing Bore Dia. | 2.75 in |
| Lip Type | Single Lip |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 210 °F |
| Case Construction | Steel Case w/Inner Case |
| Solid | Yes |
| Overall Width | 0.313 in |
| Speed | 0.07 ft/min |
| Seal Design | SKF Wave |
| Lip Style | Internal |
| Construction | CRWH1 |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Installation | Housing Press Fit |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Min] | -40 °F |
| Case Design | Metal Case, Inner Case |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Design | CRWH1 |
| Temperature Range [Max] | 225 °F |
| Weight | 0.107 LB |
| EAN or UPC | 85311017084 |
