Find a Service Center
Alternate Products
- 1 in Shaft Diameter
- 3 in Housing Bore Diameter
- 7 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Construction | CRWH1 |
| Pressure | 10 psi |
| Housing Bore Dia. | 3 in |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Design | CRWH1 |
| Seal Type | Oil |
| Speed | 0.07 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Min] | -40 °F |
| Lip Type | Single Lip |
| Inch/Metric | Inch |
| Lip Style | Internal |
| Installation | Housing Press Fit |
| Case Construction | Steel Case w/Inner Case |
| Case Design | Metal Case, Inner Case |
| Spring Material | Carbon Steel Garter |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 1.625 in |
| Overall Width | 0.313 in |
| Temperature Range [Max] | 225 °F |
| Operating Temperature [Min] | -40 °F |
| Operating Temperature [Max] | 210 °F |
| Solid | Yes |
| Seal Design | SKF Wave |
| Weight | 0.166 LB |
| EAN or UPC | 85311017138 |
