Find a Service Center
- 1.688 in Shaft Diameter
- 2.437 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Shaft Dia. | 1.688 in |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Seal Application | General Purpose |
| Spring Type | Garter |
| Bore Sealant | Bore Tite |
| Spring Material | Carbon Steel |
| Cover/Compensation Ring/Plate Required | No |
| Seal Type | Oil |
| Lip Type | Single Lip |
| Case Design | Metal Case |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Max] | 210 °F |
| Solid | Yes |
| Temperature Range [Min] | -65 °F |
| Surface Speed [Nom] | 1,990 ft/min |
| Lip Style | Internal |
| Case Material | Steel |
| Overall Width | 0.313 in |
| Case Construction | Steel Case w/o Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Speed | 0.07 ft/min |
| Pressure | 10 psi |
| Housing Bore Dia. | 2.437 in |
| Temperature Range [Max] | 225 °F |
| Construction | CRW1 |
| Seal Design | SKF Wave |
| Design | CRW1 |
| Weight | 0.091 LB |
| EAN or UPC | 85311017558 |
