Find a Service Center
- 1 in Shaft Diameter
- 2 in Housing Bore Diameter
- 11 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Seal Design | Standard |
| Lip Type | Dual Lip |
| Seal Type | Grease |
| Installation | Housing Press Fit |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Min] | -65 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Construction | HMSA7 |
| Housing Bore Dia. | 2.551 in |
| Case Construction | Rubber Covered Steel Case |
| Shaft Dia. | 1.688 in |
| Pressure | 7 psi |
| Design | HMSA7 |
| Operating Temperature [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Seal Application | Light Dirt Exclusion |
| Inch/Metric | Inch |
| Solid | Yes |
| Lip Style | Internal |
| Cover/Compensation Ring/Plate Required | No |
| Speed | 0.05 ft/min |
| Spring Material | Carbon Steel Garter |
| Case Design | Rubber Outside Diameter |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Max] | 225 °F |
| Overall Width | 0.47 in |
| Weight | 0.132 LB |
| EAN or UPC | 85311017619 |
