Find a Service Center
- Radial Shaft Seal
- 16 mm Shaft Diameter
- 38 mm Housing Bore Diameter
- 7 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Pressure | 10 psi |
| Surface Speed [Nom] | 3,600 ft/min |
| Inch/Metric | Metric |
| Housing Bore Dia. | 38 mm |
| Seal Design | Standard |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Min] | -40 °F |
| Lip Type | Dual Lip w/One Spring |
| Case Construction | Rubber Covered Steel Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Spring Material | Carbon Steel Garter |
| Seal Application | Light Dirt Exclusion |
| Construction | HMSA7 |
| Shaft Dia. | 16 mm |
| Overall Width | 7 mm |
| Lip Style | Internal |
| Temperature Range [Max] | 250 °F |
| Seal Type | Grease |
| Weight | 0.318 LB |
| EAN or UPC | 85311237819 |
