Find a Service Center
Alternate Products
- 1.75 in Shaft Diameter
- 2.502 in Housing Bore
- 0.313 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Pressure | 10 psi |
| Shaft Dia. | 1.75 in |
| Lip Style | Internal |
| Seal Type | Oil |
| Housing Bore Dia. | 2.502 in |
| Case Construction | Steel Case w/o Inner Case |
| Design | CRW1 |
| Bore Sealant | Bore Tite |
| Spring Material | Stainless Steel |
| Speed | 0.07 ft/min |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -40 °F |
| Seal Application | General Purpose |
| Spring Type | Garter |
| Operating Temperature [Max] | 390 °F |
| Lubricant | Oil or Grease |
| Case Design | Metal Case |
| Lip Type | Single Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Construction | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Case Material | Steel |
| Temperature Range [Max] | 400 °F |
| Seal Design | SKF Wave |
| Solid | Yes |
| Surface Speed [Nom] | 2,063 ft/min |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Overall Width | 0.313 in |
| Operating Temperature [Min] | -5 °F |
| Weight | 0.089 LB |
| EAN or UPC | 85311018470 |
