Find a Service Center
Alternate Products
- 1.813 in Shaft Diameter
- 2.623 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case |
| Speed | 0.07 ft/min |
| Spring Type | Garter |
| Pressure | 10 psi |
| Bore Sealant | Bore Tite |
| Seal Application | General Purpose |
| Temperature Range [Min] | -65 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Construction | CRW1 |
| Solid | Yes |
| Installation | Housing Press Fit |
| Shaft Dia. | 1.813 in |
| Temperature Range [Max] | 225 °F |
| Case Construction | Steel Case w/o Inner Case |
| Lip Style | Internal |
| Seal Design | SKF Wave |
| Design | CRW1 |
| Lip Type | Single Lip |
| Overall Width | 0.313 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Type | Oil |
| Housing Bore Dia. | 2.623 in |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Case Material | Steel |
| Cover/Compensation Ring/Plate Required | No |
| Surface Speed [Nom] | 2,138 ft/min |
| Weight | 0.089 LB |
| EAN or UPC | 85311019682 |
