Find a Service Center
- 1.88 in Shaft Diameter
- 2.81 in Housing Bore Diameter
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- High pumping rate
- With garter spring
- Accommodate misalignment
| Shaft Dia. | 1.88 in, 47.63 mm |
| Operating Temperature [Min] | -40 °F |
| Spring Material | Carbon Steel Garter |
| Seal Design | Assembled Design |
| Temperature Range [Min] | -65 °F |
| Pressure | 10 psi |
| Lip Style | Internal |
| Design | HMSA16 |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Application | Dirt Exclusion |
| Overall Width | 0.5 in, 12.7 mm |
| Inch/Metric | Metric |
| Housing Bore Dia. | 2.81 in, 71.45 mm |
| Temperature Range [Max] | 225 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Construction | Steel Case w/o Inner Case |
| Lip Type | Dual Lip |
| Construction | HMSA16 |
| Lubricant | Oil or Grease |
| Installation | Housing Press Fit |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 0.14 LB |
| EAN or UPC | 85311020442 |
