Find a Service Center
- 1.94 in Shaft Diameter
- 2.47 in Housing Bore Diameter
- 0.31 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Operating Temperature [Min] | -5 °F |
| Installation | Housing Press Fit |
| Temperature Range [Max] | 400 °F |
| Lip Material | Fluoro Rubber (FKM) |
| Case Construction | Rubber Covered Steel Case |
| Pressure | 10 psi |
| Temperature Range [Min] | -40 °F |
| Spring Type | Garter |
| Seal Application | Dirt Exclusion |
| Construction | HMSA1 |
| Lip Type | Dual Lip |
| Operating Temperature [Max] | 390 °F |
| Lip Style | Internal |
| Lubricant | Oil or Grease |
| Spring Material | Carbon Steel |
| Shaft Dia. | 1.94 in, 49.23 mm |
| Seal Design | Assembled Design |
| Inch/Metric | Inch |
| Overall Width | 0.31 in, 7.95 mm |
| Housing Bore Dia. | 2.47 in, 62.76 mm |
| Surface Speed [Nom] | 3,600 ft/min |
| Case Design | Metal Case |
| Design | HMSA1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Cover/Compensation Ring/Plate Required | No |
| Case Material | Steel |
| Weight | 0.111 LB |
| EAN or UPC | 85311992824 |
