Find a Service Center
Alternate Products
- 1.938 in Shaft Diameter
- 3.543 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Housing Bore Dia. | 3.543 in |
| Overall Width | 0.313 in |
| Case Material | Steel |
| Shaft Dia. | 1.938 in |
| Seal Application | General Purpose |
| Speed | 0.07 ft/min |
| Construction | CRW1 |
| Seal Type | Oil |
| Lip Style | Internal |
| Bore Sealant | Bore Tite |
| Seal Design | SKF Wave |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Spring Material | Carbon Steel |
| Solid | Yes |
| Operating Temperature [Max] | 210 °F |
| Case Construction | Steel Case w/o Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case |
| Design | CRW1 |
| Spring Type | Garter |
| Pressure | 10 psi |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Temperature Range [Max] | 225 °F |
| Temperature Range [Min] | -65 °F |
| Weight | 0.163 LB |
| EAN or UPC | 85311021623 |
