Find a Service Center
- 2 in Shaft Diameter
- 3 in Housing Bore Diameter
- 0.38 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 3,600 ft/min |
| Temperature Range [Max] | 400 °F |
| Operating Temperature [Max] | 390 °F |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Temperature Range [Min] | -40 °F |
| Installation | Housing Press Fit |
| Design | CRWH1 |
| Construction | CRWH1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Case Material | Steel |
| Pressure | 10 psi |
| Shaft Dia. | 2 in |
| Housing Bore Dia. | 3 in |
| Lip Type | Single Lip |
| Spring Material | Carbon Steel |
| Cover/Compensation Ring/Plate Required | No |
| Overall Width | 0.375 in |
| Case Design | Metal Case, Inner Case |
| Seal Type | Oil |
| Operating Temperature [Min] | -5 °F |
| Solid | Yes |
| Spring Type | Garter |
| Seal Design | SKF Wave |
| Seal Application | General Purpose |
| Case Construction | Steel Case w/Inner Case |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Lip Style | Internal |
| Lubricant | Oil or Grease |
| Weight | 0.122 LB |
| EAN or UPC | 85311022613 |
