Find a Service Center
Alternate Products
- 2.000 in Shaft Diameter
- 3.623 in Housing Bore Diameter
- 0.438 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Spring Material | Carbon Steel |
| Seal Type | Oil |
| Solid | Yes |
| Inch/Metric | Inch |
| Lip Material | Nitrile Rubber (NBR) |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -40 °F |
| Lip Type | Single Lip |
| Operating Temperature [Min] | -40 °F |
| Pressure | 10 psi |
| Housing Bore Dia. | 3.623 in |
| Case Design | Metal Case, Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Overall Width | 0.438 in |
| Construction | CRWH1 |
| Case Construction | Steel Case w/Inner Case |
| Seal Design | SKF Wave |
| Shaft Dia. | 2 in |
| Operating Temperature [Max] | 210 °F |
| Design | CRWH1 |
| Speed | 0.07 ft/min |
| Case Material | Steel |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Lubricant | Oil or Grease |
| Temperature Range [Max] | 225 °F |
| Cover/Compensation Ring/Plate Required | No |
| Bore Sealant | Bore Tite |
| Spring Type | Garter |
| Weight | 0.328 LB |
| EAN or UPC | 85311022873 |
