Find a Service Center
- 2.063 in Shaft Diameter
- 2.750 in Housing Bore Diameter
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.313 in |
| Housing Bore Dia. | 2.75 in |
| Installation | Housing Press Fit |
| Solid | Yes |
| Lip Material | Nitrile Rubber (NBR) |
| Spring Material | Carbon Steel Garter |
| Case Design | Metal Case, Inner Case |
| Shaft Dia. | 2.063 in |
| Speed | 0.07 ft/min |
| Seal Type | Oil |
| Lip Type | Single Lip |
| Seal Application | General Purpose |
| Temperature Range [Max] | 225 °F |
| Case Construction | Steel Case w/Inner Case |
| Lip Style | Internal |
| Seal Design | SKF Wave |
| Lubricant | Oil or Grease |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Min] | -40 °F |
| Design | CRWH1 |
| Pressure | 10 psi |
| Inch/Metric | Inch |
| Construction | CRWH1 |
| Operating Temperature [Min] | -40 °F |
| Operating Temperature [Max] | 210 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Weight | 0.113 LB |
| EAN or UPC | 85311023269 |
