Find a Service Center
Alternate Products
- 2.063 in Shaft Diameter
- 2.875 in Housing Bore Diameter
- 0.438 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Shaft Dia. | 2.063 in |
| Solid | Yes |
| Seal Application | General Purpose |
| Overall Width | 0.438 in |
| Speed | 0.07 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Construction | CRWH1 |
| Temperature Range [Min] | -40 °F |
| Design | CRWH1 |
| Installation | Housing Press Fit |
| Housing Bore Dia. | 2.875 in |
| Pressure | 10 psi |
| Temperature Range [Max] | 225 °F |
| Lip Style | Internal |
| Seal Design | SKF Wave |
| Seal Type | Oil |
| Operating Temperature [Max] | 210 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Operating Temperature [Min] | -40 °F |
| Spring Material | Carbon Steel Garter |
| Lip Type | Single Lip |
| Case Construction | Steel Case w/Inner Case |
| Lubricant | Oil or Grease |
| Case Design | Metal Case, Inner Case |
| Weight | 0.112 LB |
| EAN or UPC | 85311023283 |
