Find a Service Center
Alternate Products
- 2.06 in Shaft Diameter
- 3 in Housing Bore Diameter
- 0.44 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Design | Metal Case, Inner Case |
| Case Construction | Steel Case w/Inner Case |
| Construction | CRWH1 |
| Operating Temperature [Max] | 210 °F |
| Lip Type | Single Lip |
| Solid | Yes |
| Shaft Dia. | 2.063 in |
| Bore Sealant | Bore Tite |
| Overall Width | 0.438 in |
| Seal Application | General Purpose |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | SKF Wave |
| Speed | 0.07 ft/min |
| Pressure | 10 psi |
| Seal Type | Oil |
| Temperature Range [Max] | 225 °F |
| Housing Bore Dia. | 2.997 in |
| Lip Style | Internal |
| Inch/Metric | Inch |
| Design | CRWH1 |
| Surface Speed [Nom] | 3,600 ft/min |
| Operating Temperature [Min] | -40 °F |
| Spring Material | Carbon Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Spring Type | Garter |
| Temperature Range [Min] | -40 °F |
| Case Material | Steel |
| Installation | Housing Press Fit |
| Weight | 0.157 LB |
| EAN or UPC | 85311023306 |
