Find a Service Center
Alternate Products
- 2 in Shaft Diameter
- 3 in Housing Bore Diameter
- 7 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.313 in |
| Temperature Range [Max] | 225 °F |
| Design | CRWH1 |
| Construction | CRWH1 |
| Spring Material | Carbon Steel Garter |
| Case Design | Metal Case, Inner Case |
| Seal Application | General Purpose |
| Lip Type | Single Lip |
| Inch/Metric | Inch |
| Installation | Housing Press Fit |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Housing Bore Dia. | 3.061 in |
| Lip Style | Internal |
| Solid | Yes |
| Case Construction | Steel Case w/Inner Case |
| Seal Design | SKF Wave |
| Operating Temperature [Min] | -40 °F |
| Operating Temperature [Max] | 210 °F |
| Pressure | 10 psi |
| Seal Type | Oil |
| Speed | 0.07 ft/min |
| Shaft Dia. | 2.063 in |
| Weight | 0.112 LB |
| EAN or UPC | 85311023344 |
