Find a Service Center
Alternate Products
- 2.063 in Shaft Diameter
- 3.125 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Design | Metal Case |
| Spring Type | Garter |
| Pressure | 10 psi |
| Speed | 0.07 ft/min |
| Shaft Dia. | 2.063 in |
| Lip Style | Internal |
| Design | CRW1 |
| Case Construction | Steel Case w/o Inner Case |
| Lubricant | Oil or Grease |
| Case Material | Steel |
| Seal Design | SKF Wave |
| Spring Material | Carbon Steel |
| Operating Temperature [Max] | 210 °F |
| Surface Speed [Nom] | 2,432 ft/min |
| Operating Temperature [Min] | -40 °F |
| Construction | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Bore Sealant | Bore Tite |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Type | Single Lip |
| Housing Bore Dia. | 3.125 in |
| Seal Application | General Purpose |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Solid | Yes |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Overall Width | 0.375 in |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -65 °F |
| Temperature Range [Max] | 225 °F |
| Weight | 0.143 LB |
| EAN or UPC | 85311023351 |
