Find a Service Center
Alternate Products
- 2.063 in Shaft Diameter
- 3.189 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Min] | -40 °F |
| Seal Application | General Purpose |
| Lip Type | Single Lip |
| Pressure | 10 psi |
| Construction | CRW1 |
| Lubricant | Oil or Grease |
| Case Design | Metal Case |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Seal Type | Oil |
| Temperature Range [Max] | 225 °F |
| Installation | Housing Press Fit |
| Housing Bore Dia. | 3.189 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Construction | Steel Case w/o Inner Case |
| Spring Material | Carbon Steel Garter |
| Design | CRW1 |
| Temperature Range [Min] | -65 °F |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 210 °F |
| Shaft Dia. | 2.063 in |
| Overall Width | 0.375 in |
| Weight | 0.115 LB |
| EAN or UPC | 85311023399 |
