Find a Service Center
Alternate Products
- 2.06 in Shaft Diameter
- 3.25 in Housing Bore Diameter
- 0.44 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Min] | -40 °F |
| Bore Sealant | Bore Tite |
| Temperature Range [Max] | 225 °F |
| Overall Width | 0.438 in |
| Shaft Dia. | 2.063 in |
| Spring Type | Garter |
| Installation | Housing Press Fit |
| Construction | CRWH1 |
| Operating Temperature [Max] | 210 °F |
| Pressure | 10 psi |
| Temperature Range [Min] | -40 °F |
| Lip Type | Single Lip |
| Case Design | Metal Case, Inner Case |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel |
| Solid | Yes |
| Inch/Metric | Inch |
| Lip Style | Internal |
| Design | CRWH1 |
| Seal Type | Oil |
| Case Construction | Steel Case w/Inner Case |
| Lip Material | Nitrile Rubber (NBR) |
| Case Material | Steel |
| Speed | 0.07 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Housing Bore Dia. | 3.251 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Design | SKF Wave |
| Weight | 0.165 LB |
| EAN or UPC | 85311023412 |
