Find a Service Center
Alternate Products
- 2.125 in Shaft Diameter
- 2.875 in Housing Bore
- 0.375 in Overall Width
- Silicone Rubber (MVQ) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Design | CRW1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Min] | -90 °F |
| Lubricant | Oil or Grease |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Overall Width | 0.375 in |
| Construction | CRW1 |
| Surface Speed [Nom] | 2,505 ft/min |
| Housing Bore Dia. | 2.875 in |
| Temperature Range [Max] | 325 °F |
| Case Design | Metal Case |
| Cover/Compensation Ring/Plate Required | No |
| Speed | 0.07 ft/min |
| Temperature Range [Min] | -100 °F |
| Operating Temperature [Max] | 320 °F |
| Spring Material | Carbon Steel Garter |
| Inch/Metric | Inch |
| Shaft Dia. | 2.125 in |
| Installation | Housing Press Fit |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Lip Material | Silicone Rubber (MVQ) |
| Pressure | 10 psi |
| Case Construction | Steel Case w/o Inner Case |
| Solid | Yes |
| Weight | 0.095 LB |
| EAN or UPC | 85311023689 |
