Find a Service Center
Alternate Products
- 2.19 in Shaft Diameter
- 3.35 in Housing Bore Diameter
- 0.44 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Spring Type | Garter |
| Pressure | 10 psi |
| Speed | 0.07 ft/min |
| Lip Style | Internal |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Lip Type | Single Lip |
| Construction | CRWH1 |
| Housing Bore Dia. | 3.35 in |
| Seal Type | Oil |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Spring Material | Carbon Steel |
| Inch/Metric | Inch |
| Case Construction | Steel Case w/Inner Case |
| Solid | Yes |
| Overall Width | 0.438 in |
| Seal Design | SKF Wave |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Max] | 225 °F |
| Seal Application | General Purpose |
| Lip Material | Nitrile Rubber (NBR) |
| Design | CRWH1 |
| Shaft Dia. | 2.188 in |
| Operating Temperature [Max] | 210 °F |
| Case Material | Steel |
| Lubricant | Oil or Grease |
| Case Design | Metal Case, Inner Case |
| Bore Sealant | Bore Tite |
| Weight | 0.455 LB |
| EAN or UPC | 85311024419 |
