Find a Service Center
Alternate Products
- 2.19 in Shaft Diameter
- 3.35 in Housing Bore Diameter
- 0.44 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Max] | 210 °F |
| Seal Type | Oil |
| Case Material | Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Pressure | 10 psi |
| Lubricant | Oil or Grease |
| Lip Style | Internal |
| Shaft Dia. | 2.188 in |
| Speed | 0.07 ft/min |
| Case Design | Metal Case, Inner Case |
| Construction | CRWH1 |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Inch |
| Overall Width | 0.438 in |
| Installation | Housing Press Fit |
| Design | CRWH1 |
| Lip Type | Single Lip |
| Solid | Yes |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 3.35 in |
| Bore Sealant | Bore Tite |
| Operating Temperature [Min] | -40 °F |
| Spring Type | Garter |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | SKF Wave |
| Case Construction | Steel Case w/Inner Case |
| Spring Material | Carbon Steel |
| Temperature Range [Max] | 225 °F |
| Seal Application | General Purpose |
| Weight | 0.455 LB |
| EAN or UPC | 85311024419 |
