Find a Service Center
- 2.31 in Shaft Diameter
- 3 in Housing Bore Diameter
- 0.44 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Spring Type | Garter |
| Seal Type | Oil |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -5 °F |
| Inch/Metric | Inch |
| Temperature Range [Min] | -40 °F |
| Solid | Yes |
| Installation | Housing Press Fit |
| Bore Sealant | Bore Tite |
| Surface Speed [Nom] | 3,600 ft/min |
| Temperature Range [Max] | 400 °F |
| Operating Temperature [Max] | 390 °F |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Speed | 0.07 ft/min |
| Construction | CRWH1 |
| Spring Material | Carbon Steel |
| Seal Design | SKF Wave |
| Case Design | Metal Case, Inner Case |
| Case Construction | Steel Case w/Inner Case |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 3 in |
| Case Material | Steel |
| Design | CRWH1 |
| Seal Application | General Purpose |
| Shaft Dia. | 2.313 in |
| Overall Width | 0.438 in |
| Lip Type | Single Lip |
| Weight | 0.107 LB |
| EAN or UPC | 85311025485 |
