Find a Service Center
Alternate Products
- 2 in Shaft Diameter
- 3 in Housing Bore Diameter
- 11 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Design | Metal Case, Inner Case |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 3.35 in |
| Design | CRWH1 |
| Spring Material | Carbon Steel Garter |
| Lip Style | Internal |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 2.313 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Lip Type | Single Lip |
| Installation | Housing Press Fit |
| Overall Width | 0.438 in |
| Lubricant | Oil or Grease |
| Seal Type | Oil |
| Seal Application | General Purpose |
| Surface Speed [Nom] | 3,600 ft/min |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 210 °F |
| Speed | 0.07 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Case Construction | Steel Case w/Inner Case |
| Construction | CRWH1 |
| Seal Design | SKF Wave |
| Pressure | 10 psi |
| Temperature Range [Max] | 225 °F |
| Weight | 0.28 LB |
| EAN or UPC | 85311025577 |
