Find a Service Center
- 2 in Shaft Diameter
- 3 in Housing Bore Diameter
- 7 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Pressure | 7 psi |
| Case Design | Metal Case |
| Construction | HMSA29 |
| Lip Type | Triple Lip |
| Design | HMSA29 |
| Overall Width | 7 mm |
| Operating Temperature [Min] | -40 °F |
| Housing Bore Dia. | 3 in, 86 mm |
| Seal Application | Light Dirt Exclusion |
| Seal Design | Assembled Design |
| Speed | 0.05 ft/min |
| Temperature Range [Min] | -40 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Max] | 210 °F |
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal / External |
| Shaft Dia. | 2 in, 60 mm |
| Case Construction | Steel Case w/o Inner Case |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Max] | 250 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Surface Speed [Nom] | 3,600 ft/min |
| Installation | Housing Press Fit |
| Inch/Metric | Metric |
| Lubricant | Oil or Grease |
| Weight | 0.277 LB |
| EAN or UPC | 85311156356 |
