Find a Service Center
Alternate Products
- 2.375 in Shaft Diameter
- 3 in Housing Bore
- 0.375 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Application | General Purpose |
| Temperature Range [Max] | 400 °F |
| Lip Style | Internal |
| Speed | 0.07 ft/min |
| Case Design | Metal Case |
| Operating Temperature [Min] | -5 °F |
| Inch/Metric | Inch |
| Lip Type | Single Lip |
| Overall Width | 0.375 in |
| Pressure | 10 psi |
| Installation | Housing Press Fit |
| Housing Bore Dia. | 3 in |
| Design | CRW1 |
| Lubricant | Oil or Grease |
| Construction | CRW1 |
| Shaft Dia. | 2.375 in |
| Operating Temperature [Max] | 390 °F |
| Seal Design | SKF Wave |
| Solid | Yes |
| Seal Type | Oil |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Cover/Compensation Ring/Plate Required | No |
| Surface Speed [Nom] | 2,800 ft/min |
| Temperature Range [Min] | -40 °F |
| Case Construction | Steel Case w/o Inner Case |
| Spring Material | Carbon Steel Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Weight | 0.066 LB |
| EAN or UPC | 85311025911 |
