- 2.38 in Shaft Diameter
- 3.06 in Housing Bore Diameter
- 0.44 in Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Cover/Compensation Ring/Plate Required | No |
| Case Design | Metal Case, Inner Case |
| Overall Width | 0.438 in |
| Temperature Range [Max] | 300 °F |
| Seal Type | Oil |
| Case Material | Steel |
| Construction | CRWH1 |
| Solid | Yes |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Spring Type | Garter |
| Lip Type | Single Lip |
| Spring Material | Carbon Steel |
| Shaft Dia. | 2.375 in |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 302 °F |
| Seal Design | SKF Wave |
| Bore Sealant | Bore Tite |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -40 °F |
| Case Construction | Steel Case w/Inner Case |
| Installation | Housing Press Fit |
| Design | CRWH1 |
| Seal Application | General Purpose |
| Speed | 0.07 ft/min |
| Pressure | 10 psi |
| Temperature Range [Min] | -40 °F |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Housing Bore Dia. | 3.061 in |
| Weight | 0.183 LB |
| EAN or UPC | 85311025935 |

