Find a Service Center
- 2.38 in Shaft Diameter
- 3.37 in Housing Bore Diameter
- 0.44 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Max] | 400 °F |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 390 °F |
| Temperature Range [Min] | -40 °F |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Bore Sealant | Bore Tite |
| Seal Type | Oil |
| Spring Material | Carbon Steel |
| Overall Width | 0.438 in |
| Surface Speed [Nom] | 3,600 ft/min |
| Operating Temperature [Min] | -5 °F |
| Design | CRWH1 |
| Inch/Metric | Inch |
| Lubricant | Oil or Grease |
| Cover/Compensation Ring/Plate Required | No |
| Installation | Housing Press Fit |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Shaft Dia. | 2.375 in |
| Housing Bore Dia. | 3.371 in |
| Case Design | Metal Case, Inner Case |
| Case Construction | Steel Case w/Inner Case |
| Construction | CRWH1 |
| Speed | 0.07 ft/min |
| Lip Style | Internal |
| Case Material | Steel |
| Solid | Yes |
| Seal Application | General Purpose |
| Lip Type | Single Lip |
| Spring Type | Garter |
| Pressure | 10 psi |
| Weight | 0.216 LB |
| EAN or UPC | 85311026161 |
