Find a Service Center
Alternate Products
- 2.375 in Shaft Diameter
- 3.601 in Housing Bore
- 0.438 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.438 in |
| Surface Speed [Nom] | 2,800 ft/min |
| Seal Type | Oil |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Solid | Yes |
| Pressure | 10 psi |
| Lip Type | Single Lip |
| Temperature Range [Max] | 225 °F |
| Design | CRW1 |
| Operating Temperature [Max] | 210 °F |
| Seal Application | General Purpose |
| Shaft Dia. | 2.375 in |
| Case Construction | Steel Case w/o Inner Case |
| Case Design | Metal Case |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Temperature Range [Min] | -65 °F |
| Housing Bore Dia. | 3.601 in |
| Lip Style | Internal |
| Speed | 0.07 ft/min |
| Seal Design | SKF Wave |
| Operating Temperature [Min] | -40 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Installation | Housing Press Fit |
| Cover/Compensation Ring/Plate Required | No |
| Spring Material | Carbon Steel Garter |
| Construction | CRW1 |
| Weight | 0.284 LB |
| EAN or UPC | 85311026277 |
