Find a Service Center
Alternate Products
- 2 in Shaft Diameter
- 3 in Housing Bore Diameter
- 11 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Spring Material | Carbon Steel Garter |
| Pressure | 10 psi |
| Design | CRWH1 |
| Lip Type | Single Lip |
| Inch/Metric | Inch |
| Operating Temperature [Min] | -40 °F |
| Installation | Housing Press Fit |
| Shaft Dia. | 2.375 in |
| Overall Width | 0.438 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Design | SKF Wave |
| Construction | CRWH1 |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 225 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Solid | Yes |
| Seal Type | Oil |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Max] | 210 °F |
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Case Design | Metal Case, Inner Case |
| Housing Bore Dia. | 3.623 in |
| Lubricant | Oil or Grease |
| Weight | 0.303 LB |
| EAN or UPC | 85311026291 |
