Find a Service Center
Alternate Products
- 2 in Shaft Diameter
- 3 in Housing Bore Diameter
- 7 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
caution
- Not generally for oil retention
| Pressure | 3 psi |
| Construction | TL1 |
| Overall Width | 7 mm |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Case Construction | Steel Case w/o Inner Case |
| Surface Speed [Nom] | 500 ft/min |
| Case Design | Metal Case |
| Temperature Range [Min] | -65 °F |
| Lip Type | Triple Lip |
| Installation | Housing Press Fit |
| Inch/Metric | Metric |
| Temperature Range [Max] | 225 °F |
| Shaft Dia. | 2 in, 62 mm |
| Design | TL1 |
| Operating Temperature [Min] | -40 °F |
| Housing Bore Dia. | 3 in, 89 mm |
| Solid | Yes |
| Seal Application | Dirt Exclusion And Grease Retention At Slower Speeds, Severe Conditions |
| Seal Design | Assembled Design |
| Speed | 0.02 ft/min |
| Lubricant | Grease |
| Operating Temperature [Max] | 210 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.010@500 |
| Cover/Compensation Ring/Plate Required | No |
| Spring Material | Carbon Steel Garter |
| Weight | 0.238 LB |
| EAN or UPC | 85311026611 |
