Find a Service Center
Alternate Products
- 2.5 in Shaft Diameter
- 3.3 in Housing Bore Diameter
- 0.45 in Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- High pumping rate
- With garter spring
- Accommodate misalignment
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Overall Width | 0.45 in, 11.51 mm |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 2.5 in, 63.5 mm |
| Inch/Metric | Metric |
| Lip Material | Nitrile Rubber (NBR) |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Housing Bore Dia. | 3.3 in, 83.85 mm |
| Pressure | 10 psi |
| Seal Design | Assembled Design |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Max] | 225 °F |
| Lip Style | Internal |
| Lubricant | Oil or Grease |
| Design | HMSA16 |
| Temperature Range [Min] | -65 °F |
| Seal Application | Dirt Exclusion |
| Operating Temperature [Max] | 210 °F |
| Lip Type | Dual Lip |
| Case Construction | Steel Case w/o Inner Case |
| Construction | HMSA16 |
| Weight | 0.276 LB |
| EAN or UPC | 85311026901 |
