Find a Service Center
Alternate Products
- 2.63 in Shaft Diameter
- 3.5 in Housing Bore Diameter
- 0.44 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.438 in |
| Case Material | Steel |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Cover/Compensation Ring/Plate Required | No |
| Case Design | Metal Case, Inner Case |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Surface Speed [Nom] | 3,600 ft/min |
| Operating Temperature [Max] | 210 °F |
| Seal Type | Oil |
| Lip Style | Internal |
| Spring Material | Carbon Steel |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Max] | 225 °F |
| Shaft Dia. | 2.625 in |
| Construction | CRWH1 |
| Case Construction | Steel Case w/Inner Case |
| Bore Sealant | Bore Tite |
| Solid | Yes |
| Design | CRWH1 |
| Seal Design | SKF Wave |
| Installation | Housing Press Fit |
| Pressure | 10 psi |
| Housing Bore Dia. | 3.5 in |
| Spring Type | Garter |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Min] | -40 °F |
| Weight | 0.18 LB |
| EAN or UPC | 85311027748 |
