Find a Service Center
Alternate Products
- 2.63 in Shaft Diameter
- 3.54 in Housing Bore Diameter
- 0.44 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.438 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Spring Type | Garter |
| Housing Bore Dia. | 3.543 in |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel |
| Surface Speed [Nom] | 3,095 ft/min |
| Design | CRWH1 |
| Case Construction | Steel Case w/Inner Case |
| Installation | Housing Press Fit |
| Construction | CRWH1 |
| Case Design | Metal Case, Inner Case |
| Seal Type | Oil |
| Lubricant | Oil or Grease |
| Case Material | Steel |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Bore Sealant | Bore Tite |
| Pressure | 10 psi |
| Shaft Dia. | 2.625 in |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Temperature Range [Min] | -65 °F |
| Lip Style | Internal |
| Temperature Range [Max] | 225 °F |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 0.19 LB |
| EAN or UPC | 85311027779 |
